AVS® • 56044096 • Tape-On Matte Black Low Profile Ventvisor™ and Aeroskin™ • Hood Shield Combo Kit • Ford F-150 15-20
by
AVS
Sold out
$414.98
SKU AV56044096
As you cruise down the highway listening to your favorite tunes, your hood is under assault. Sand, pebbles, stones and a myriad of other debris is floating off the back of dump trucks and launched into the air by tractor trailer tires, all making a beeline for your hood., crashing into the paint and leaving behind chips, scratches, dings and even dents. Before long, without protection, your hood will have the look of a weathered old beater.
You can keep this from happening quickly and easily with a Matte Black Aeroskin Hood Shield. Aeroskin shields are custom molded for a skin-tight fit, and they’re made of virtually indestructible impact modified acrylic to absorb the punishment and stay looking good. These are the lowest profile shields on the market, so you get unmatched protection with a sleek, stylish aerodynamic appearance. Installation takes only minutes with 3M double-sided tape; no drilling is required.
Traditional Ventvisors have a definite profile which we think is attractive and enhances the style of any vehicle, but it may not be the look you want. If you’re looking for the lowest profile ventvisors available and don’t want to sacrifice functionality, then these Low Profile Ventvisors are for you. They have an OE installed look that’s ideal for luxury vehicles, and some versions even come with chrome trim attached. They install to the body, above the window frame, like conventional Ventvisors, and provide the same benefits: They let you keep your windows open enough for fresh air circulation without getting wet, and they’ll significantly reduce wind noise so you can drive at speed with the windows open. They’ll also keep your interior cooler during the hot summer months by allowing you to crack your windows when parked in the sun.
This Combo Kit installs quickly and easily with 3M acrylic foam tape, and no drilling is required. This tape is so effective it’s used by the automobile manufacturers to attach trim parts at the factory. Because no drilling is required, there’s no need to worry about rust forming at a hole. The foam core allows the tape to expand and contract with temperature changes and conform to surface irregularities. Installation is not only simpler; there are no unsightly fasteners to deal with.
You can run your car or truck through the car wash with Low Profile Ventvisors and Aeroskin Hood Shield installed; however automatic “brush-style” car washes should be avoided. They come with everything required for installation, including detailed instructions, and they’re covered by a limited lifetime warranty against defects in materials and workmanship. The warranty applies to the original purchaser as long as he or she owns the vehicle on which the product is installed.
Traditional Ventvisors have a definite profile which we think is attractive and enhances the style of any vehicle, but it may not be the look you want. If you’re looking for the lowest profile ventvisors available and don’t want to sacrifice functionality, then these Low Profile Ventvisors are for you. They have an OE installed look that’s ideal for luxury vehicles, and some versions even come with chrome trim attached. They install to the body, above the window frame, like conventional Ventvisors, and provide the same benefits: They let you keep your windows open enough for fresh air circulation without getting wet, and they’ll significantly reduce wind noise so you can drive at speed with the windows open. They’ll also keep your interior cooler during the hot summer months by allowing you to crack your windows when parked in the sun.
Low Profile Ventvisors are designed to meld perfectly with your vehicle’s style. They’re made of rugged reinforced acrylic that is UV and scratch resistant, with an attractive smoke finish that will help shield the sun from your eyes and be a stylish enhancement to any vehicle. AVS uses a higher grade acrylic material than most other manufacturers, which means Low Profile Ventvisors will hold their smoke finish longer, and are just the right thickness to be strong yet flexible for a perfect fit.
Low Profile Ventvisors install quickly and easily with 3M acrylic foam tape, and no drilling is required. This tape is so effective it’s used by the automobile manufacturers to attach trim parts at the factory. Because no drilling is required, there’s no need to worry about rust forming at a hole. The foam core allows the tape to expand and contract with temperature changes and conform to surface irregularities. Installation is not only simpler; there are no unsightly fasteners to deal with. Just clean the surface according to the included instructions, then remove the backing from the tape and press the Low Profile Ventvisor into place.
You can run your car or truck through the car wash with Low Profile Ventvisors installed; however automatic “brush-style” car washes should be avoided. They come with everything required for installation, including detailed instructions, and they’re covered by a limited lifetime warranty against defects in materials and workmanship. The warranty applies to the original purchaser as long as he or she owns the vehicle on which the product is installed.
You can keep this from happening quickly and easily with a Matte Black Aeroskin Hood Shield. Aeroskin shields are custom molded for a skin-tight fit, and they’re made of virtually indestructible impact modified acrylic to absorb the punishment and stay looking good. These are the lowest profile shields on the market, so you get unmatched protection with a sleek, stylish aerodynamic appearance. Installation takes only minutes with 3M double-sided tape; no drilling is required.
Traditional Ventvisors have a definite profile which we think is attractive and enhances the style of any vehicle, but it may not be the look you want. If you’re looking for the lowest profile ventvisors available and don’t want to sacrifice functionality, then these Low Profile Ventvisors are for you. They have an OE installed look that’s ideal for luxury vehicles, and some versions even come with chrome trim attached. They install to the body, above the window frame, like conventional Ventvisors, and provide the same benefits: They let you keep your windows open enough for fresh air circulation without getting wet, and they’ll significantly reduce wind noise so you can drive at speed with the windows open. They’ll also keep your interior cooler during the hot summer months by allowing you to crack your windows when parked in the sun.
This Combo Kit installs quickly and easily with 3M acrylic foam tape, and no drilling is required. This tape is so effective it’s used by the automobile manufacturers to attach trim parts at the factory. Because no drilling is required, there’s no need to worry about rust forming at a hole. The foam core allows the tape to expand and contract with temperature changes and conform to surface irregularities. Installation is not only simpler; there are no unsightly fasteners to deal with.
You can run your car or truck through the car wash with Low Profile Ventvisors and Aeroskin Hood Shield installed; however automatic “brush-style” car washes should be avoided. They come with everything required for installation, including detailed instructions, and they’re covered by a limited lifetime warranty against defects in materials and workmanship. The warranty applies to the original purchaser as long as he or she owns the vehicle on which the product is installed.
Traditional Ventvisors have a definite profile which we think is attractive and enhances the style of any vehicle, but it may not be the look you want. If you’re looking for the lowest profile ventvisors available and don’t want to sacrifice functionality, then these Low Profile Ventvisors are for you. They have an OE installed look that’s ideal for luxury vehicles, and some versions even come with chrome trim attached. They install to the body, above the window frame, like conventional Ventvisors, and provide the same benefits: They let you keep your windows open enough for fresh air circulation without getting wet, and they’ll significantly reduce wind noise so you can drive at speed with the windows open. They’ll also keep your interior cooler during the hot summer months by allowing you to crack your windows when parked in the sun.
Low Profile Ventvisors are designed to meld perfectly with your vehicle’s style. They’re made of rugged reinforced acrylic that is UV and scratch resistant, with an attractive smoke finish that will help shield the sun from your eyes and be a stylish enhancement to any vehicle. AVS uses a higher grade acrylic material than most other manufacturers, which means Low Profile Ventvisors will hold their smoke finish longer, and are just the right thickness to be strong yet flexible for a perfect fit.
Low Profile Ventvisors install quickly and easily with 3M acrylic foam tape, and no drilling is required. This tape is so effective it’s used by the automobile manufacturers to attach trim parts at the factory. Because no drilling is required, there’s no need to worry about rust forming at a hole. The foam core allows the tape to expand and contract with temperature changes and conform to surface irregularities. Installation is not only simpler; there are no unsightly fasteners to deal with. Just clean the surface according to the included instructions, then remove the backing from the tape and press the Low Profile Ventvisor into place.
You can run your car or truck through the car wash with Low Profile Ventvisors installed; however automatic “brush-style” car washes should be avoided. They come with everything required for installation, including detailed instructions, and they’re covered by a limited lifetime warranty against defects in materials and workmanship. The warranty applies to the original purchaser as long as he or she owns the vehicle on which the product is installed.
- Drilling is not required.
- Tape-on mount style
- Includes 3M adhesive, no drilling required
- OE (original equipment) installed appearance
- Allows fresh air in while keeping, rain, wind, and drafts out
- Coordinates with OE black trim and aftermarket flat black wheels
- Made from a durable UV-protected Tri-Flex™ ABS thermoplastic
- Fresh air circulation removes stale air and odors
- Reduces wind noise, keeping interior quieter
- Reduces mirror fogging
- Shields your eyes from the sun for safer driving
- Allows you to crack the windows when parked in the sun, to let heat escape and keep interior cooler
- Custom designed for each vehicle, for a precision fit
- Car wash safe
- Comes with detailed installation instructions
- Backed by a limited lifetime warranty
- Proudly made in the USA
- Low Profile Ventvisor™ Matte Black Front and Rear Window Deflectors - 4-Piece Set
- Matte Black Acrylic Aeroskin™ Hood Shield - 1 Piece
- Mounting Hardware
Installation kit
An installation kit is needed for proper installation on your vehicle
Installion Kit Available
Choose your vehicle
Vehicle |
|
|